Valves with threaded end connections are appropriate for piping systems with low pressure. These are reasonably priced and guarantee easy and quick assembly for consumers. Once they are assembled, these connections may occasionally be welded around the joint. However, this is not very useful in practice because it may generate issues with the efficient usage of these sorts of valve end connections. As threaded valve suppliers come in two types: Threaded ball valves and threaded gate valves.
A threaded globe valve or ball valve is a specific kind of quarter-turn valve that controls the flow through it using a revolving, perforated, hollow ball. When the ball's hole lines up with the flow, the valve opens; when the handle of the valve rotates the ball 90 degrees, the valve closes. The handle is flat against the flow when it is opened. On the other hand, when it is closed, the handle is perpendicular to the flow. This makes it easier to able to sense the valve's condition. These valves are also known as stop valves, shutdown valves, and isolation valves since they are typically used for basic on/off service.
In contrast to ball valves, the threaded gate valve opens by raising a square or round gate out of the fluid's passage. A sealing surface on gate valves separates the gate and seats. They are frequently used when the minimal restriction is required when a fluid flows in a straight line. A horizontally turning valve and a stem make up a ball valve, on the other hand. Due to the hollow and perforated ball used by ball valves to control the flow, they behave differently than threaded gate valve.
Our Product List